handsets

joystick with spring return to centre to give forward and reverse, with a keyswitch for on/off, used for speed control, gives deadman effect when released, not for dynamic brake controllers. £37.00p

joystick with power and brake, with keyswitch for on/off and for/neu/rev switch, the joystick can either spring load back to the centre from both directions, spring back to the centre from power direction only or spring back into full brake. £29.00p

joystick with 4K7 pot for your own system.

Has +/- 20° from centre, the 4K7 pot can be adjusted to travel any 40° of it’s travel, other value pots can be supplied. Joysticks can be easily set or changed to any of the following, spring return to one end, spring return to centre for/rev. Spring return to centre from one end only. £21.00p

3 position key combined on/off and direction for use with unswitched pot, this can be added to any handset except J2 , having this option means you don’t need the for/neu/rev switch. £12.50

for use on loco’s that are driven from both ends,3 position key combining on/off and direction not for J2

£18.50p

All prices include 17.5% VAT

With key switch, For/Neu/Rev switch, unswitched pot on leads £6.00p

Foot treddle control for speed controllers mainly for use with kiddie cars, includes key switch, for/neu/rev switch and push pot, £25.00p for dynamic braking add £29.00p

Joystick with spring return to one end, also has for/neu/rev switch and a key switch for on/off , used for speed control but has deadman effect when released, not for dynamic braking controllers. £26.50p

Pot angle amplifier, this is to shorten the travel/angle that the speed controller knob needs to be moved to get full control, this is especially useful for joysticks (comes fitted as standard on our joystick handsets) and for tram type controls where only a small travel is required on the speed handle knob. £9.20p

Same as above but in a box £6.75p

UN1

PT1

FT1

UNB1